Chicken automatic drinking water device installation steps detailed

2024-05-29

1. site selection

First of all, we need to choose a place close to the water source, well ventilated, dry and clean to install the automatic drinker. At the same time, it is necessary to consider sufficient light to ensure that chickens are not affected by light when taking water.

2. mounting bracket

Fix the bracket of the drinking fountain in a suitable position in the chicken house and ensure the stability of the bracket. Choose strong materials, such as steel pipes or wooden strips, and fix them to the top or side walls of the chicken house.

3. fixed drinking fountain

Place the drinker on the stand and fix it on the stand. When fixing, it should be noted that the bottom of the drinking fountain should be kept at a certain distance from the ground to avoid sewage pollution and dirty water directly splashing on the chicken.

4. water pipe

Connect the water pipe to the automatic water dispenser to ensure that the water pipe can carry the water source smoothly. At the same time, pay attention to the length and bending degree of the water pipe, so as not to affect the normal use of the drinker.

5. height adjustment

Adjust the height of the drinking fountain so that the chicken can easily get water. Generally speaking, the bottom of the drinking fountain should be between 15-20cm from the ground.

To sum up, installing the chicken automatic drinker requires us to choose the appropriate position, fix the bracket, fix the drinker, connect the water pipe, and adjust the height. Through correct installation and adjustment, it can provide clean and convenient drinking water environment for chickens, and provide a strong guarantee for the healthy growth of chickens.